CC FEA | Description | Suppl. | Rate of import |
Code | | unit | customs duty |
| | of | (as a per cent |
| | measu- | of the customs |
| | rement | value or |
| | | in euros) |
| I. Primary Materials; Products | | |
| in Granular or Powder Form | | |
7201 | Pig iron and spiegeleisen in | | |
| pigs, blocks or other primary | | |
| forms: | | |
7201 10 | - non-alloy pig iron containing | | |
| by weight 0.5% or less of | | |
| phosphorus: | | |
| - - containing by weight not less | | |
| than 0.4% of manganese: | | |
7201 10 110 0 | - - - containing by weight 1% or | - | 5 |
| less of silicon | | |
7201 10 190 0 | - - - containing by weight more | - | 5 |
| than 1% of silicon | | |
7201 10 300 0 | - - containing by weight not | - | 5 |
| less than 0.1% but less than 0.4% | | |
| of manganese | | |
7201 10 900 0 | - - containing by weight less | - | 5 |
| than 0.1% of manganese | | |
7201 20 000 0 | - non-alloy pig iron containing | - | 5 |
| by weight more than 0.5% of | | |
| phosphorus | | |
7201 50 | - alloy pig iron; spiegeleisen: | | |
7201 50 100 0 | - - alloy pig iron containing by | - | 5 |
| weight not less than 0.3% but | | |
| not more than 1% of titanium and | | |
| not less than 0.5% but not more | | |
| than 1% of vanadium | | |
7201 50 900 0 | - - other | - | 5 |
7202 | Ferro-alloys: | | |
| - ferro-manganese: | | |
7202 11 | - - containing by weight more | | |
| than 2% of carbon: | | |
7202 11 200 0 | - - - with a granulometry not | - | 5 |
| exceeding than 5 mm and a | | |
| manganese content by weight 65% | | |
7202 11 800 0 | - - - other | - | 5 |
7202 19 000 0 | - - other | - | 5 |
| - ferro-silicon: | | |
7202 21 | - - containing by weight more | | |
| than 55% of silicon: | | |
7202 21 100 0 | - - - containing by weight more | - | 5 |
| than 55% but not more than 80% of | | |
| silicon | | |
7202 21 900 0 | - - - containing by weight more | - | 5 |
| than 80% of silicon | | |
7202 29 | - - other: | | |
7202 29 100 0 | - - - containing by weight more | - | 5 |
| than 4% but not more than 10% of | | |
| manganese | | |
7202 29 900 | - - - other | - | 5 |
7202 30 000 0 | - ferro-silico-manganese | - | 5 |
| - ferro-chromium: | | |
7202 41 | - - containing by weight more | | |
| than 4% of carbon: | | |
7202 41 100 0 | - - - containing by weight more | - | 5 |
| than 4% but not more than 6% of | | |
| carbon | | |
| - - - containing by weight more | | |
| than 6% of carbon: | | |
7202 41 910 0 | - - - - containing by weight not | - | 5 |
| more than 60% of chromium | | |
7202 41 990 0 | - - - - containing by weight more | - | 5 |
| than 60% of chromium | | |
7202 49 | - - other: | | |
7202 49 100 0 | - - - containing by weight not | - | 5 |
| more than 0.05% of carbon | | |
7202 49 500 0 | - - - containing by weight more | - | 5 |
| than 0.05% but not more than 0.5% | | |
| of carbon | | |
7202 49 900 0 | - - - containing by weight more | - | 5 |
| than 0.5% but not more than 4% of | | |
| carbon | | |
7202 50 000 0 | - ferro-silico-chromium | - | 5 |
7202 60 000 0 | - ferro-nickel | - | 5 |
7202 70 000 0 | - ferro-molybdenum | - | 5 |
7202 80 000 0 | - ferro-tungsten and | - | 5 |
| ferro-silico-tungsten | | |
| - other: | | |
7202 91 000 0 | - - ferro-titanium and | - | 5 |
| ferro-silico-titanium | | |
7202 92 000 0 | - - ferro-vanadium | - | 5 |
7202 93 000 0 | - - ferro-niobium | - | 5 |
7202 99 | - - other: | | |
| - - - ferro-phosphorus: | | |
7202 99 110 0 | - - - - containing by weight more | - | 5 |
| than 3% but less than 15% of | | |
| phosphorus | | |
7202 99 190 0 | - - - - containing by weight 15% | - | 5 |
| or more of phosphorus | | |
7202 99 300 0 | - - - ferro-silico-magnesium | - | 5 |
7202 99 800 0 | - - - other | - | 5 |
7203 | Ferrous products obtained by | | |
| direct reduction of iron ore and | | |
| other spongy ferrous products, in | | |
| lumps, pellets or similar forms; | | |
| iron having a minimum purity by | | |
| weight of 99.94%, in lumps, | | |
| pellets or similar forms: | | |
7203 10 000 0 | - ferrous products obtained by | - | 5 |
| direct reduction of iron ore | | |
7203 90 000 0 | - other | - | 5 |
7204 | Ferrous waste and scrap; | | |
| remelting scrap ingots of iron or | | |
| steel: | | |
7204 10 000 0 | - waste and scrap of cast iron | - | 5 |
| - waste and scrap of alloy steel: | | |
7204 21 | - - of stainless steel: | | |
7204 21 100 0 | - - - containing by weight 8% or | - | 5 |
| more of nickel | | |
7204 21 900 0 | - - - other | - | 5 |
7204 29 000 0 | - - other | - | 5 |
7204 30 000 0 | - waste and scrap of tinned iron | - | 5 |
| or steel | | |
| - other waste and scrap: | | |
7204 41 | - - turnings, shavings, chips, | | |
| milling waste, sawdust, filings, | | |
| trimmings and stampings, whether | | |
| or not in bundles: | | |
7204 41 100 0 | - - - turnings, shavings, chips, | - | 5 |
| milling waste, sawdust and | | |
| filings | | |
| - - - trimmings and stampings: | | |
7204 41 910 0 | - - - - in bundles | - | 5 |
7204 41 990 0 | - - - - other | - | 5 |
7204 49 | - - other: | | |
7204 49 100 0 | - - - fragmentized (shredded) | - | 5 |
| - - - other: | | |
7204 49 300 0 | - - - - in bundles | - | 5 |
| - - - - other: | | |
7204 49 910 0 | - - - - - neither sorted or | - | 5 |
| graded | | |
7204 49 990 0 | - - - - - other | - | 5 |
7204 50 | - remelting scrap ingots: | | |
7204 50 100 0 | - - of alloy steel | - | 5 |
7204 50 900 0 | - - other | - | 5 |
7205 | Granules and powders, of pig | | |
| iron, spiegeleisen, iron or | | |
| steel: | | |
7205 10 000 0 | - granules | - | 5 |
| - powders: | | |
7205 21 000 0 | - - of alloy steel | - | 5 |
7205 29 000 0 | - - other | - | 5 |
| II. Iron and Non-Alloy Steel | | |
7206 | Iron and non-alloy steel in | | |
| ingots or other primary forms | | |
| (excluding iron of Heading 7203): | | |
7206 10 000 0 | - ingots | - | 5 |
7206 90 000 0 | - other | - | 5 |
7207 | Semi-finished products of iron or | | |
| non-alloy steel: | | |
| - containing by weight less than | | |
| 0.25% of carbon: | | |
7207 11 | - - of rectangular (including | | |
| square) cross-section, the width | | |
| measuring less than twice the | | |
| thickness: | | |
| - - - rolled or obtained by | | |
| continuous casting: | | |
7207 11 110 0 | - - - - of free-cutting steel | - | 5 |
| - - - - other: | | |
7207 11 140 0 | - - - - - of a thickness not | - | 5 |
| exceeding 130 mm | | |
7207 11 160 0 | - - - - - of a thickness | - | 5 |
| exceeding 130 mm | | |
7207 11 900 0 | - - - forged | - | 5 |
7207 12 | - - other, of rectangular (other | | |
| than square) cross-section: | | |
7207 12 100 0 | - - - rolled or obtained by | - | 5 |
| continuous casting | | |
7207 12 900 0 | - - - forged | - | 5 |
7207 19 | - - other: | | |
| - - - of circular or polygonal | | |
| cross-section: | | |
| - - - - rolled or obtained by | | |
| continuous casting: | | |
7207 19 110 0 | - - - - - of free-cutting steel | - | 5 |
| - - - - - other: | | |
7207 19 140 0 | - - - - - - obtained by | - | 5 |
| continuous casting | | |
7207 19 160 0 | - - - - - - other | - | 5 |
7207 19 190 0 | - - - - forged | - | 5 |
| - - - blanks for angles, shapes | | |
| and sections: | | |
7207 19 310 0 | - - - - rolled or obtained by | - | 5 |
| continuous casting | | |
7207 19 390 0 | - - - - forged | - | 5 |
7207 19 900 0 | - - - other | - | 5 |
7207 20 | - containing by weight 0.25% or | | |
| more of carbon: | | |
| - - of rectangular (including | | |
| square) cross-section, the width | | |
| measuring less than twice the | | |
| thickness: | | |
| - - - rolled or obtained by | | |
| continuous casting: | | |
7207 20 110 0 | - - - - of free-cutting steel | - | 5 |
| - - - - other, containing by | | |
| weight: | | |
7207 20 150 0 | - - - - - 0.25% or more but less | - | 5 |
| than 0.6% of carbon | | |
7207 20 170 0 | - - - - - 0.6% or more of carbon | - | 5 |
7207 20 190 0 | - - - forged | - | 5 |
| - - other, of rectangular (other | | |
| than square) cross-section: | | |
7207 20 320 0 | - - - rolled or obtained by | - | 5 |
| continuous casting | | |
7207 20 390 0 | - - - forged | - | 5 |
| - - of circular or polygonal | | |
| cross-section: | | |
| - - - rolled or obtained by | | |
| continuous casting: | | |
7207 20 510 0 | - - - - of free-cutting steel | - | 5 |
| - - - - other: | | |
7207 20 550 0 | - - - - - containing by weight | - | 5 |
| 0.25% or more but less than 0.6% | | |
| of carbon | | |
7207 20 570 0 | - - - - - containing by weight | - | 5 |
| 0.6% or more of carbon | | |
7207 20 590 0 | - - - forged | - | 5 |
| - - blanks for angles, shapes and | | |
| sections: | | |
7207 20 710 0 | - - - rolled or obtained by | - | 5 |
| continuous casting | | |
7207 20 790 0 | - - - forged | - | 5 |
7207 20 900 0 | - - other | - | 5 |
7208 | Flat-rolled products of iron or | | |
| non-alloy steel, of a width of | | |
| 600 mm or more, hot-rolled, not | | |
| clad, plated or coated: | | |
7208 10 000 0 | - in coils, not further worked | - | 5 |
| than hot-rolled, with patterns in | | |
| relief | | |
| - other, in coils, not further | | |
| worked than hot-rolled, pickled: | | |
7208 25 000 0 | - - of a thickness of 4.75 mm or | - | 5 |
| more | | |
7208 26 000 0 | - - of a thickness of 3 mm or | - | 5 |
| more but less than 4.75 mm | | |
7208 27 000 0 | - - of a thickness of less than 3 | - | 5 |
| mm | | |
| - other, in coils, not further | | |
| worked than hot-rolled: | | |
7208 36 000 0 | - - of a thickness exceeding 10 | - | 5 |
| mm | | |
7208 37 | - - of a thickness of 4.75 mm or | | |
| more but not exceeding 10 mm: | | |
7208 37 100 0 | - - - intended for re-rolling | - | 5 |
7208 37 900 0 | - - - other | - | 5 |
7208 38 | - - of a thickness of 3 mm or | | |
| more but less than 4.75 mm: | | |
7208 38 100 0 | - - - intended for re-rolling | - | 5 |
7208 38 900 0 | - - - other | - | 5 |
7208 39 | - - of a thickness of less than 3 | | |
| mm: | | |
7208 39 100 0 | - - - intended for re-rolling | - | 5 |
7208 39 900 0 | - - - other | - | 5 |
7208 40 | - not in coils, not further | | |
| worked than hot-rolled, with | | |
| patterns in relief: | | |
7208 40 100 0 | - - of a thickness of 2 mm or | - | 5 |
| more | | |
7208 40 900 0 | - - of a thickness of less than 2 | - | 5 |
| mm | | |
| - other, not in coils, not | | |
| further worked than hot-rolled: | | |
7208 51 | - - of a thickness exceeding 10 | | |
| mm: | | |
7208 51 100 0 | - - - rolled on four faces or in | - | 5 |
| a closed box pass, of a width not | | |
| exceeding 1.250 mm | | |
| - - - other, of a thickness: | | |
7208 51 300 0 | - - - - exceeding 20 mm | - | 5 |
7208 51 500 0 | - - - - exceeding 15 mm but not | - | 5 |
| exceeding 20 mm | | |
| - - - - exceeding 10 mm but not | | |
| exceeding 15 mm, of a width of: | | |
7208 51 910 0 | - - - - - 2.050 mm or more | - | 5 |
7208 51 990 0 | - - - - - less than 2.050 mm | - | 5 |
7208 52 | - - other, of a thickness of 4.75 | | |
| mm or more but not exceeding 10 | | |
| mm: | | |
7208 52 100 0 | - - - rolled on four faces or in | - | 5 |
| a closed box pass, of a width not | | |
| exceeding 1.250 mm | | |
| - - - other, of a width of: | | |
7208 52 910 0 | - - - - 2.050 mm or more | - | 5 |
7208 52 990 0 | - - - - less than 2.050 mm | - | 5 |
7208 53 | - - of a thickness of 3 mm or | | |
| more but less than 4.75 mm: | | |
7208 53 100 0 | - - - rolled on four faces or in | - | 5 |
| a closed box pass, of a width not | | |
| exceeding 1.250 mm and of a | | |
| thickness of not less than 4 mm | | |
7208 53 900 0 | - - - other | - | 5 |
7208 54 | - - of a thickness of less than 3 | | |
| mm: | | |
7208 54 100 0 | - - - of a thickness of 2 mm or | - | 5 |
| more | | |
7208 54 900 0 | - - - of a thickness of less than | - | 5 |
| 2 mm | | |
7208 90 | - other: | | |
7208 90 100 0 | - - not further worked than | - | 5 |
| surface-treated or simply cut | | |
| into shapes other than | | |
| rectangular (including square) | | |
7208 90 900 0 | - - other | - | 5 |
7209 | Flat-rolled products of iron or | | |
| non-alloy steel, of a width of | | |
| 600 mm or more, cold-rolled | | |
| (cold-reduced), not clad, plated | | |
| or coated: | | |
| - in coils, not further worked | | |
| than cold-rolled (cold-reduced): | | |
7209 15 000 0 | - - of a thickness of 3 mm or | - | 5 |
| more | | |
7209 16 | - - of a thickness exceeding 1 mm | | |
| but less than 3 mm: | | |
7209 16 100 0 | - - - "electrical" | - | 5 |
7209 16 900 0 | - - - other | - | 5 |
7209 17 | - - of a thickness of 0.5 mm or | | |
| more but not exceeding 1 mm: | | |
7209 17 100 0 | - - - "electrical" | - | 5 |
7209 17 900 0 | - - - other | - | 5 |
7209 18 | - - of a thickness of less than | - | 5 |
| 0.5 mm: | | |
7209 18 100 0 | - - - "electrical" | - | 5 |
| - - - other: | | |
7209 18 910 0 | - - - - of a thickness of 0.35 mm | - | 5 |
| or more but less than 0.5 mm | | |
7209 18 990 0 | - - - - of a thickness of less | - | 5 |
| than 0.35 mm | | |
| - not in coils, not further | | |
| worked than cold-rolled | | |
| (cold-reduced): | | |
7209 25 000 0 | - - of a thickness of 3 mm or | - | 5 |
| more | | |
7209 26 | - - of a thickness exceeding 1 mm | | |
| but less than 3 mm: | | |
7209 26 100 0 | - - - "electrical" | - | 5 |
7209 26 900 0 | - - - other | - | 5 |
7209 27 | - - of a thickness of 0.5 mm or | | |
| more but not exceeding 1 mm: | | |
7209 27 100 0 | - - - "electrical" | - | 5 |
7209 27 900 0 | - - - other | - | 5 |
7209 28 | - - of a thickness of less than | | |
| 0.5 mm: | | |
7209 28 100 0 | - - - "electrical" | - | 5 |
7209 28 900 0 | - - - other | - | 5 |
7209 90 | - other: | | |
7209 90 100 0 | - - not further worked than | - | 5 |
| surface-treated or simply cut | | |
| into shapes other than | | |
| rectangular (including square) | | |
7209 90 900 0 | - - other | - | 5 |
7210 | Flat-rolled products of iron or | | |
| non-alloy steel, of a width of | | |
| 600 mm or more, clad, plated or | | |
| coated: | | |
| - plated or coated with tin: | | |
7210 11 | - - of a thickness of 0.5 mm or | | |
| more: | | |
7210 11 100 0 | - - - not further worked than | - | 5 |
| surface-treated or simply cut | | |
| into shapes other than | | |
| rectangular (including square) | | |
7210 11 900 0 | - - - other | - | 5 |
7210 12 | - - of a thickness of less than | | |
| 0.5 mm: | | |
| - - - not further worked than | | |
| surface-treated or simply cut | | |
| into shapes other than | | |
| rectangular (including square): | | |
7210 12 110 0 | - - - - tinplate | - | 5 |
7210 12 190 0 | - - - - other | - | 5 |
7210 12 900 0 | - - - other | - | 5 |
7210 20 | - plated or coated with lead, | | |
| including terne-plate: | | |
7210 20 100 0 | - - not further worked than | - | 5 |
| surface-treated or simply cut | | |
| into shapes other than | | |
| rectangular (including square) | | |
7210 20 900 0 | - - other | - | 5 |
7210 30 | - electrolytically plated or | | |
| coated with zinc: | | |
7210 30 100 0 | - - not further worked than | - | 5 |
| surface-treated or simply cut | | |
| into shapes other than | | |
| rectangular (including square) | | |
7210 30 900 0 | - - other | - | 5 |
| - otherwise plated or coated with | | |
| zinc: | | |
7210 41 | - - corrugated: | | |
7210 41 100 0 | - - - not further worked than | - | 5 |
| surface-treated or simply cut | | |
| into shapes other than | | |
| rectangular (including square) | | |
7210 41 900 0 | - - - other | - | 5 |
7210 49 | - - other: | | |
7210 49 100 0 | - - - not further worked than | - | 5 |
| surface-treated or simply cut | | |
| into shapes other than | | |
| rectangular (including square) | | |
7210 49 900 0 | - - - other | - | 5 |
7210 50 | - plated or coated with chromium | | |
| oxides or with chromium and | | |
| chromium oxides: | | |
7210 50 100 0 | - - not further worked than | - | 5 |
| surface-treated or simply cut | | |
| into shapes other than | | |
| rectangular (including square) | | |
7210 50 900 0 | - - other | - | 5 |
| - plated or coated with | | |
| aluminium: | | |
7210 61 | - - plated or coated with | | |
| aluminium-zinc alloys: | | |
7210 61 100 0 | - - - not further worked than | - | 5 |
| surface-treated or simply cut | | |
| into shapes other than | | |
| rectangular (including square) | | |
7210 61 900 0 | - - - other | - | 5 |
7210 69 | - - other: | | |
7210 69 100 0 | - - - not further worked than | - | 5 |
| surface-treated or simply cut | | |
| into shapes other than | | |
| rectangular (including square) | | |
7210 69 900 0 | - - - other | - | 5 |
7210 70 | - painted, varnished or coated | | |
| with plastics: | | |
| - - not further worked than | | |
| surface-treated or simply cut | | |
| into shapes other than | | |
| rectangular (including square): | | |
7210 70 310 0 | - - - tinplate and products, | - | 5 |
| plated or coated with chromium | | |
| oxides or with chromium and | | |
| chromium oxides, varnished | | |
7210 70 390 0 | - - - other | - | 5 |
7210 70 900 0 | - - other | - | 5 |
7210 90 | - other: | | |
7210 90 100 0 | - - silvered, gilded, | - | 5 |
| platinum-plated or enamelled | | |
| - - other: | | |
| - - - not further worked than | | |
| surface-treated, including | | |
| cladding or simply cut into | | |
| shapes other than rectangular | | |
| (including square): | | |
7210 90 310 0 | - - - - clad | - | 5 |
7210 90 330 0 | - - - - tinned and printed | - | 5 |
7210 90 380 0 | - - - - other | - | 5 |
7210 90 900 0 | - - - other | - | 5 |
7211 | Flat-rolled products of iron or | | |
| non-alloy steel, of a width of | | |
| less than 600 mm, not clad, | | |
| plated or coated: | | |
| - not further worked than | | |
| hot-rolled: | | |
7211 13 000 0 | - - rolled on four faces or in a | - | 5 |
| closed box pass, of a width | | |
| exceeding 150 mm and a thickness | | |
| of not less than 4 mm, not in | | |
| coils and without patterns in | | |
| relief | | |
7211 14 | - - other, of a thickness of 4.75 | | |
| mm or more: | | |
7211 14 100 0 | - - - of a width exceeding 500 mm | - | 5 |
7211 14 900 0 | - - - of a width not exceeding | - | 5 |
| 500 mm | | |
7211 19 | - - other: | | |
7211 19 200 0 | - - - of a width exceeding 500 mm | - | 5 |
7211 19 900 0 | - - - of a width not exceeding | - | 5 |
| 500 mm | | |
| - not further worked than | | |
| cold-rolled (cold-reduced): | | |
7211 23 | - - containing by weight less | | |
| than 0.25% of carbon: | | |
7211 23 100 0 | - - - of a width exceeding 500 mm | - | 5 |
| - - - of a width not exceeding | | |
| 500 mm: | | |
7211 23 510 0 | - - - - in coils intended for the | - | 5 |
| manufacture of tinplate | | |
| - - - - other: | | |
7211 23 910 0 | - - - - - "electrical" | - | 5 |
7211 23 990 0 | - - - - - other | - | 5 |
7211 29 | - - other: | | |
7211 29 200 0 | - - - of a width exceeding 500 mm | - | 5 |
| - - - of a width not exceeding | | |
| 500 mm: | | |
7211 29 500 0 | - - - - containing by weight | - | 5 |
| 0.25% or more but less than 0.6% | | |
| of carbon | | |
7211 29 900 0 | - - - - containing by weight 0.6% | - | 5 |
| or more of carbon | | |
7211 90 | - other: | | |
| - - of a width exceeding 500 mm: | | |
7211 90 110 0 | - - - not further worked than | - | 5 |
| surface-treated | | |
7211 90 190 0 | - - - other | - | 5 |
7211 90 900 0 | - - of a width not exceeding 500 | - | 5 |
| mm | | |
7212 | Flat-rolled products of iron or | | |
| non-alloy steel, of a width of | | |
| less than 600 mm, clad, plated or | | |
| coated: | | |
7212 10 | - plated or coated with tin: | | |
7212 10 100 0 | - - tinplate, not further worked | - | 5 |
| than surface-treated | | |
| - - other: | | |
| - - - of a width exceeding 500 | | |
| mm: | | |
7212 10 910 0 | - - - - not further worked than | - | 5 |
| surface-treated | | |
7212 10 930 0 | - - - - other | - | 5 |
7212 10 990 0 | - - - of a width not exceeding | - | 5 |
| 500 mm | | |
7212 20 | - electrolytically plated or | | |
| coated with zinc: | | |
| - - of a width exceeding 500 mm: | | |
7212 20 110 0 | - - - not further worked than | - | 5 |
| surface-treated | | |
7212 20 190 0 | - - - other | - | 5 |
7212 20 900 0 | - - of a width not exceeding 500 | - | 5 |
| mm | | |
7212 30 | - otherwise plated or coated with | | |
| zinc: | | |
| - - of a width exceeding 500 mm: | | |
7212 30 110 0 | - - - not further worked than | - | 5 |
| surface-treated | | |
7212 30 190 0 | - - - other | - | 5 |
7212 30 900 0 | - - of a width not exceeding 500 | - | 5 |
| mm | | |
7212 40 | - painted, varnished or coated | | |
| with plastics: | | |
7212 40 100 0 | - - tinplate, not further worked | - | 5 |
| than varnished | | |
| - - other: | | |
| - - - of a width exceeding 500 | | |
| mm: | | |
7212 40 910 0 | - - - - not further worked than | - | 5 |
| surface-treated | | |
7212 40 930 0 | - - - - other | - | 5 |
| - - - of a width not exceeding | | |
| 500 mm: | | |
7212 40 950 0 | - - - - plated or coated with | - | 5 |
| chromium oxides or with chromium | | |
| and chromium oxides, varnished | | |
7212 40 980 0 | - - - - other | - | 5 |
7212 50 | - otherwise plated or coated: | | |
| - - of a width exceeding 500 mm: | | |
7212 50 100 0 | - - - silvered, gilded, | - | 5 |
| platinum-plated or enamelled | | |
| - - - other: | | |
| - - - - not further worked than | | |
| surface-treated: | | |
7212 50 310 0 | - - - - - lead-coated | - | 5 |
7212 50 510 0 | - - - - - other | - | 5 |
7212 50 580 0 | - - - - other | - | 5 |
| - - of a width not exceeding 500 | | |
| mm: | | |
7212 50 750 0 | - - - plated or coated with | - | 5 |
| copper | | |
7212 50 910 0 | - - - plated or coated with | - | 5 |
| chromium or nickel | | |
| - - - plated or coated with | | |
| aluminium: | | |
7212 50 930 0 | - - - - plated or coated with | - | 5 |
| aluminium-zinc alloys | | |
7212 50 970 0 | - - - - other | - | 5 |
7212 50 990 0 | - - - other | - | 5 |
7212 60 | - clad: | | |
| - - of a width exceeding 500 mm: | | |
7212 60 110 0 | - - - not further worked than | - | 5 |
| surface-treated | | |
7212 60 190 0 | - - - other | - | 5 |
| - - of a width not exceeding 500 | | |
| mm: | | |
| - - - not further worked than | | |
| surface-treated: | | |
7212 60 910 0 | - - - - hot-rolled, not further | - | 5 |
| worked than clad | | |
7212 60 930 0 | - - - - other | - | 5 |
7212 60 990 0 | - - - other | - | 5 |
7213 | Bars and rods, hot-rolled, in | | |
| irregularly wound coils, of iron | | |
| or non-alloy steel: | | |
7213 10 000 0 | - containing indentations, ribs, | - | 5 |
| grooves or other deformations | | |
| produced during the rolling | | |
| process | | |
7213 20 000 0 | - other, of free-cutting steel | - | 5 |
| - other: | | |
7213 91 | - - of circular cross-section | | |
| measuring less than 14 mm in | | |
| diameter: | | |
7213 91 100 0 | - - - of type used for concrete | - | 5 |
| reinforcement | | |
7213 91 200 0 | - - - of a type used for tyre | - | 5 |
| cord | | |
| - - - other: | | |
7213 91 410 0 | - - - - containing by weight | - | 5 |
| 0.06% or less of carbon | | |
7213 91 490 0 | - - - - containing by weight more | - | 5 |
| than 0.06% but less than 0.25% of | | |
| carbon | | |
7213 91 700 0 | - - - - containing by weight | - | 5 |
| 0.25% or more but not more than | | |
| 0.75% of carbon | | |
7213 91 900 0 | - - - - containing by weight more | - | 5 |
| than 0.75% of carbon | | |
7213 99 | - - other: | | |
7213 99 100 0 | - - - containing by weight less | - | 5 |
| than 0.25% of carbon | | |
7213 99 900 0 | - - - containing by weight 0.25% | - | 5 |
| or more of carbon | | |
7214 | Other bars and rods of iron or | | |
| non-alloy steel, not further | | |
| worked than forged, hot-rolled, | | |
| hot-drawn or hot-extruded but | | |
| including those twisted after | | |
| rolling: | | |
7214 10 000 0 | - forged | - | 5 |
7214 20 000 0 | - containing indentations, ribs, | - | 5 |
| grooves or other deformations | | |
| produced during the rolling | | |
| process or twisted after rolling | | |
7214 30 000 0 | - other, of free-cutting steel | - | 5 |
| - other: | | |
7214 91 | - - of rectangular (other than | | |
| square) cross-section: | | |
7214 91 100 0 | - - - containing by weight less | - | 5 |
| than 0.25% of carbon | | |
7214 91 900 0 | - - - containing by weight 0.25% | - | 5 |
| or more of carbon | | |
7214 99 | - - other: | | |
| - - - containing by weight less | | |
| than 0.25% of carbon: | | |
7214 99 100 0 | - - - - of type used for concrete | - | 5 |
| reinforcement | | |
| - - - - other, of circular | | |
| cross-section measuring in | | |
| diameter: | | |
7214 99 310 0 | - - - - - 80 mm or more | - | 5 |
7214 99 390 0 | - - - - - less than 80 mm | - | 5 |
7214 99 500 0 | - - - - other | - | 5 |
| - - - containing by weight 0.25% | | |
| or more but less than 0.6% of | | |
| carbon: | | |
| - - - - of a circular | | |
| cross-section measuring in | | |
| diameter: | | |
7214 99 610 0 | - - - - - 80 mm or more | - | 5 |
7214 99 690 0 | - - - - - less than 80 mm | - | 5 |
7214 99 800 0 | - - - - other | - | 5 |
7214 99 900 0 | - - - other, containing by weight | - | 5 |
| 0.6% or more of carbon | | |
7215 | Other bars and rods of iron or | | |
| non-alloy steel: | | |
7215 10 000 0 | - of free-cutting steel, not | - | 5 |
| further worked than cold-formed | | |
| or cold-finished | | |
7215 50 | - other, not further worked than | | |
| cold-formed or cold-finished: | | |
| - - containing by weight less | | |
| than 0.25% of carbon: | | |
7215 50 110 0 | - - - of rectangular (other than | - | 5 |
| square) cross-section | | |
7215 50 190 0 | - - - other | - | 5 |
7215 50 300 0 | - - containing by weight 0.25% or | - | 5 |
| more but less than 0.6% of | | |
| carbon | | |
7215 50 900 0 | - - containing by weight 0.6% or | - | 5 |
| more of carbon | | |
7215 90 | - other: | | |
7215 90 100 0 | - - hot-rolled, hot-drawn or | - | 5 |
| extruded, not further worked than | | |
| clad | | |
7215 90 900 0 | - - other | - | 5 |
7216 | Angles, shapes, and sections of | | |
| iron or non-alloy steel: | | |
7216 10 000 0 | - U, I, or H sections, not | - | 5 |
| further worked than hot-rolled, | | |
| hot-drawn or extruded, of a | | |
| height of less than 80 mm | | |
| - L or T sections, not further | | |
| worked than hot-rolled, hot-drawn | | |
| or extruded, of a height of less | | |
| than 80 mm: | | |
7216 21 000 0 | - - L sections | - | 5 |
7216 22 000 0 | - - T sections | - | 5 |
| - U, I or H sections, not further | | |
| worked than hot-rolled, hot-drawn | | |
| or extruded, of a height of 80 mm | | |
| or more: | | |
7216 31 | - - U sections: | | |
| - - - of a height of 80 mm or | | |
| more but not exceeding 220 mm: | | |
7216 31 110 0 | - - - - with parallel flange | - | 5 |
| faces | | |
7216 31 190 0 | - - - - other | - | 5 |
| - - - of a height exceeding 220 | | |
| mm: | | |
7216 31 910 0 | - - - - with parallel flange | - | 5 |
| faces | | |
7216 31 990 0 | - - - - other | - | 5 |
7216 32 | - - I sections: | | |
| - - - of a height of 80 mm or | | |
| more but not exceeding 220 mm: | | |
7216 32 110 0 | - - - - with parallel flange | - | 5 |
| faces | | |
7216 32 190 0 | - - - - other | - | 5 |
| - - - of a height exceeding 220 | | |
| mm: | | |
7216 32 910 0 | - - - - with parallel flange | - | 5 |
| faces | | |
7216 32 990 0 | - - - - other | - | 5 |
7216 33 | - - H sections: | | |
7216 33 100 0 | - - - of a height of 80 mm or | - | 5 |
| more but not exceeding 180 mm | | |
7216 33 900 0 | - - - of a height exceeding 180 | - | 5 |
| mm | | |
7216 40 | - L or T sections, not further | | |
| worked than hot-rolled, hot-drawn | | |
| or extruded, of a height of 80 mm | | |
| or more: | | |
7216 40 100 0 | - - L sections | - | 5 |
7216 40 900 0 | - - T sections | - | 5 |
7216 50 | - other angles, shapes and | | |
| sections, not further worked than | | |
| hot-rolled, hot-drawn or | | |
| extruded: | | |
7216 50 100 0 | - - with a cross-section which is | - | 5 |
| capable of being enclosed in a | | |
| square the side of which is 80 mm | | |
| - - other: | | |
7216 50 910 0 | - - - bulb flats | - | 5 |
7216 50 990 0 | - - - other | - | 5 |
| - angles, shapes and sections, | | |
| not further worked than | | |
| cold-formed or cold-finished: | | |
7216 61 | - - obtained from flat-rolled | | |
| products: | | |
7216 61 100 0 | - - - C, L, U, Z, omega or | - | 5 |
| open-ended sections | | |
7216 61 900 0 | - - - other | - | 5 |
7216 69 000 0 | - - other | - | 5 |
| - other: | | |
7216 91 | - - cold-formed or cold-finished | | |
| from flat-rolled products: | | |
7216 91 100 0 | - - - profiled (ribbed) sheets | - | 5 |
| - - - other: | | |
| - - - - plated or coated with | | |
| zinc, of a thickness of: | | |
7216 91 300 0 | - - - - - less than 2.5 mm | - | 5 |
7216 91 500 0 | - - - - - 2.5 mm or more | - | 5 |
7216 91 900 0 | - - - - other | - | 5 |
7216 99 | - - other: | | |
7216 99 100 0 | - - - hot-rolled, hot-drawn or | - | 5 |
| extruded, not further worked than | | |
| clad | | |
7216 99 900 0 | - - - other | - | 5 |
7217 | Wire of iron or non-alloy steel: | | |
7217 10 | - not plated or coated, whether | | |
| or not polished: | | |
| - - containing by weight less | | |
| than 0.25% of carbon: | | |
7217 10 100 0 | - - - with maximum | - | 5 |
| cross-sectional dimension of less | | |
| than 0.8 mm | | |
| - - - with maximum | | |
| cross-sectional dimension of 0.8 | | |
| mm or more: | | |
7217 10 310 0 | - - - - containing indentations, | - | 5 |
| ribs, grooves or other | | |
| deformations produced during the | | |
| rolling process | | |
7217 10 390 0 | - - - - other | - | 5 |
7217 10 500 0 | - - containing by weight 0.25% or | - | 5 |
| more but less than 0.6% of | | |
| carbon | | |
7217 10 900 0 | - - containing by weight 0.6% or | - | 5 |
| more of carbon | | |
7217 20 | - plated or coated with zinc: | | |
| - - containing by weight less | | |
| than 0.25% of carbon: | | |
7217 20 100 0 | - - - with maximum | - | 5 |
| cross-sectional dimension of less | | |
| than 0.8 mm | | |
7217 20 300 0 | - - - with maximum | - | 5 |
| cross-sectional dimension of 0.8 | | |
| mm or more | | |
7217 20 500 0 | - - containing by weight 0.25% or | - | 5 |
| more but less than 0.6% of carbon | | |
7217 20 900 0 | - - containing by weight 0.6% or | - | 5 |
| more of carbon | | |
7217 30 | - plated or coated with other | | |
| base metals: | | |
| - - containing by weight less | | |
| than 0.25% of carbon: | | |
| - - - with maximum | | |
| cross-sectional dimension of less | | |
| than 0.8 mm: | | |
7217 30 110 0 | - - - - copper-coated | - | 5 |
7217 30 190 0 | - - - - other | - | 5 |
| - - - with maximum | | |
| cross-sectional dimension of 0.8 | | |
| mm or more: | | |
7217 30 310 0 | - - - - copper-coated | - | 5 |
7217 30 390 0 | - - - - other | - | 5 |
7217 30 500 0 | - - containing by weight 0.25% or | - | 5 |
| more but less than 0.6% of carbon | | |
7217 30 900 0 | - - containing by weight 0.6% or | - | 5 |
| more of carbon | | |
7217 90 | - other: | | |
| - - containing by weight less | | |
| than 0.25% of carbon: | | |
7217 90 100 0 | - - - with maximum | - | 5 |
| cross-sectional dimension of less | | |
| than 0.8 mm | | |
7217 90 300 0 | - - - with maximum | - | 5 |
| cross-sectional dimension of 0.8 | | |
| mm or more | | |
7217 90 500 0 | - - containing by weight 0.25% or | - | 5 |
| more but less than 0.6% of | | |
| carbon | | |
7217 90 900 0 | - - containing by weight 0.6% or | - | 5 |
| more of carbon | | |
| III. Stainless Steel | | |
7218 | Stainless steel in ingots or | | |
| other primary forms; | | |
| semi-finished products of | | |
| stainless steel: | | |
7218 10 000 0 | - ingots and other primary forms | - | 5 |
| - other: | | |
7218 91 | - - of rectangular (other than | | |
| square) cross-section: | | |
| - - - rolled or obtained by | | |
| continuous casting: | | |
7218 91 110 0 | - - - - containing by weight 2.5% | - | 5 |
| or more of nickel | | |
7218 91 190 0 | - - - - containing by weight less | - | 5 |
| than 2.5% of nickel | | |
7218 91 900 0 | - - - forged | - | 5 |
7218 99 | - - other: | | |
| - - - of square cross-section: | | |
7218 99 110 0 | - - - - rolled or obtained by | - | 5 |
| continuous casting | | |
7218 99 190 0 | - - - - forged | - | 5 |
| - - - other: | | |
7218 99 200 0 | - - - - rolled or obtained by | - | 5 |
| continuous casting | | |
| - - - - forged: | | |
7218 99 910 0 | - - - - - of circular or | - | 5 |
| polygonal cross-section | | |
7218 99 990 0 | - - - - - other | - | 5 |
7219 | Flat-rolled products of stainless | | |
| steel, of a width of 600 mm or | | |
| more: | | |
| - not further worked than | | |
| hot-rolled, in coils: | | |
7219 11 000 0 | - - of a thickness exceeding 10 | - | 5 |
| mm | | |
7219 12 | - - of a thickness of 4.75 mm or | | |
| more but not exceeding 10 mm: | | |
7219 12 100 0 | - - - containing by weight 2.5% | - | 5 |
| or more of nickel | | |
7219 12 900 0 | - - - containing by weight less | - | 5 |
| than 2.5% of nickel | | |
7219 13 | - - of a thickness of 3 mm or | | |
| more but less than 4.75 mm: | | |
7219 13 100 0 | - - - containing by weight 2.5% | - | 5 |
| or more of nickel | | |
7219 13 900 0 | - - - containing by weight less | - | 5 |
| than 2.5% of nickel | | |
7219 14 | - - of a thickness of less than 3 | | |
| mm: | | |
7219 14 100 0 | - - - containing by weight 2.5% | - | 5 |
| or more of nickel | | |
7219 14 900 0 | - - - containing by weight less | - | 5 |
| than 2.5% of nickel | | |
| - not further worked than | | |
| hot-rolled, not in coils: | | |
7219 21 | - - of a thickness exceeding 10 | | |
| mm: | | |
7219 21 100 0 | - - - containing by weight 2.5% | - | 5 |
| or more of nickel | | |
7219 21 900 0 | - - - containing by weight less | - | 5 |
| than 2.5% of nickel | | |
7219 22 | - - of a thickness of 4.75 mm or | | |
| more but not exceeding 10 mm: | | |
7219 22 100 0 | - - - containing by weight 2.5% | - | 5 |
| or more of nickel | | |
7219 22 900 0 | - - - containing by weight less | - | 5 |
| than 2.5% of nickel | | |
7219 23 000 0 | - - of a thickness of 3 mm or | - | 5 |
| more but less than 4.75 mm | | |
7219 24 000 0 | - - of a thickness of less than 3 | | |
| mm | | |
| - not further worked than | | |
| cold-rolled (cold-reduced): | | |
7219 31 000 0 | - - of a thickness of 4.75 mm or | - | 5 |
| more | | |
7219 32 | - - of a thickness of 3 mm or | | |
| more but less than 4.75 mm: | | |
7219 32 100 0 | - - - containing by weight 2.5% | - | 5 |
| or more of nickel | | |
7219 32 900 0 | - - - containing by weight less | - | 5 |
| than 2.5% of nickel | | |
7219 33 | - - of a thickness exceeding 1 mm | | |
| but less than 3 mm: | | |
7219 33 100 0 | - - - containing by weight 2.5% | - | 5 |
| or more of nickel | | |
7219 33 900 0 | - - - containing by weight less | - | 5 |
| than 2.5 % of nickel | | |
7219 34 | - - of a thickness of 0.5 mm or | | |
| more but not exceeding 1 mm: | | |
7219 34 100 0 | - - - containing by weight 2.5% | - | 5 |
| or more of nickel | | |
7219 34 900 0 | - - - containing by weight less | - | 5 |
| than 2.5% of nickel | | |
7219 35 | - - of a thickness of less than | | |
| 0.5 mm: | | |
7219 35 100 0 | - - - containing by weight 2.5% | - | 5 |
| or more of nickel | | |
7219 35 900 0 | - - - containing by weight less | - | 5 |
| than 2.5% of nickel | | |
7219 90 | - other: | | |
7219 90 100 0 | - - not further worked than | - | 5 |
| surface-treated, including | | |
| cladding, or simply cut into | | |
| shapes other than rectangular | | |
| (including square) | | |
7219 90 900 0 | - - other | - | 5 |
7220 | Flat-rolled products of stainless | | |
| steel, of a width of less than | | |
| 600 mm: | | |
| - not further worked than | | |
| hot-rolled: | | |
7220 11 000 0 | - - of a thickness of 4.75 mm or | - | 5 |
| more | | |
7220 12 000 0 | - - of a thickness of less than | - | 5 |
| 4.75 mm | | |
7220 20 | - not further worked than | | |
| cold-rolled (cold-reduced): | | |
7220 20 100 0 | - - of a width exceeding 500 mm | - | 5 |
| - - of a width not exceeding 500 | | |
| mm: | | |
| - - - of a thickness of 3 mm or | | |
| more containing by weight: | | |
7220 20 310 0 | - - - - 2.5% or more of nickel | - | 5 |
7220 20 390 0 | - - - - less than 2.5% of nickel | - | 5 |
| - - - of a thickness exceeding | | |
| 0.35 mm but less than 3 mm, | | |
| containing by weight: | | |
7220 20 510 0 | - - - - 2.5% or more of nickel | - | 5 |
7220 20 590 0 | - - - - less than 2.5% of nickel | - | 5 |
| - - - of a thickness not | | |
| exceeding 0.35 mm, containing by | | |
| weight: | | |
7220 20 910 0 | - - - - 2.5% or more of nickel | - | 5 |
7220 20 990 0 | - - - - less than 2.5% of nickel | - | 5 |
7220 90 | - other: | | |
| - - of a width exceeding 500 mm: | | |
7220 90 110 0 | - - - not further worked than | - | 5 |
| surface-treated, including | | |
| cladding | | |
7220 90 190 0 | - - - other | - | 5 |
| - - of a width not exceeding 500 | | |
| mm: | | |
| - - - not further worked than | | |
| surface-treated, including | | |
| cladding: | | |
7220 90 310 0 | - - - - hot-rolled, not further | - | 5 |
| worked than clad | | |
7220 90 390 0 | - - - - other | - | 5 |
7220 90 900 0 | - - - other | - | 5 |
7221 00 | Bars and rods, hot-rolled, in | | |
| irregularly wound coils, of | | |
| stainless steel: | | |
7221 00 100 0 | - containing by weight 2.5% or | - | 5 |
| more of nickel | | |
7221 00 900 0 | - containing by weight less than | - | 5 |
| 2.5% of nickel | | |
7222 | Other bars and rods of stainless | | |
| steel; angles, shapes and | | |
| sections of stainless steel: | | |
| - bars and rods, not further | | |
| worked than hot-rolled, hot-drawn | | |
| or extruded: | | |
7222 11 | - - of circular cross-section: | | |
| - - - of a diameter of 80 mm or | | |
| more, containing by weight: | | |
7222 11 110 0 | - - - - 2.5% or more of nickel | - | 5 |
7222 11 190 0 | - - - - less than 2.5% of nickel | - | 5 |
| - - - of a diameter of 25 mm or | | |
| more but less than 80 mm, | | |
| containing by weight: | | |
7222 11 210 0 | - - - - 2.5% or more of nickel | - | 5 |
7222 11 290 0 | - - - - less than 2.5% of nickel | - | 5 |
| - - - of a diameter of less than | | |
| 25 mm, containing by weight: | | |
7222 11 910 0 | - - - - 2.5% or more of nickel | - | 5 |
7222 11 990 0 | - - - - less than 2.5% of nickel | - | 5 |
7222 19 | - - other: | | |
7222 19 100 0 | - - - containing by weight 2.5% | - | 5 |
| or more of nickel | | |
7222 19 900 0 | - - - containing by weight less | - | 5 |
| than 2.5% of nickel | | |
7222 20 | - bars and rods, not further | | |
| worked than cold-formed or | | |
| cold-finished: | | |
| - - of a circular cross-section: | | |
| - - - of a diameter of 80 mm or | | |
| more, containing by weight: | | |
7222 20 110 0 | - - - - 2.5% or more of nickel | - | 5 |
7222 20 190 0 | - - - - less than 2.5% of nickel | - | 5 |
| - - - of a diamenter of 25 mm or | | |
| more but less than 80 mm, | | |
| containing by weight: | | |
7222 20 210 0 | - - - - 2.5% or more of nickel | - | 5 |
7222 20 290 0 | - - - - less than 2.5% of nickel | - | 5 |
| - - - of a diamenter of less than | | |
| 25 mm, containing by weight: | | |
7222 20 310 0 | - - - - 2.5% or more of nickel | - | 5 |
7222 20 390 0 | - - - - less than 2.5% of nickel | - | 5 |
| - - other, containing by weight: | | |
7222 20 810 0 | - - - 2.5% or more of nickel | - | 5 |
7222 20 890 0 | - - - less than 2.5% of nickel | - | 5 |
7222 30 | - other bars and rods: | | |
7222 30 100 0 | - - hot-rolled, hot-drawn or | - | 5 |
| extruded, not further worked | | |
| than clad | | |
| - - forged, containing by weight: | | |
7222 30 510 0 | - - - 2.5% or more of nickel | - | 5 |
7222 30 910 0 | - - - less than 2.5% of nickel | - | 5 |
7222 30 980 0 | - - other | - | 5 |
7222 40 | - angles, shapes and sections: | | |
7222 40 100 0 | - - not further worked than | - | 5 |
| hot-rolled, hot-drawn or | | |
| extruded | | |
| - - other: | | |
7222 40 300 0 | - - - hot-rolled, hot-drawn or | - | 5 |
| extruded, not further worked | | |
| than clad | | |
| - - - other: | | |
| - - - - not further worked than | | |
| cold-formed or cold-finished: | | |
7222 40 910 0 | - - - - - obtained from | - | 5 |
| flat-rolled products | | |
7222 40 930 0 | - - - - - other | - | 5 |
7222 40 990 0 | - - - - other | - | 5 |
7223 00 | Wire of stainless steel: | | |
| - containing by weight 2.5% or | | |
| more of nickel: | | |
7223 00 110 0 | - - containing by weight 28% or | - | 5 |
| more but not more than 31% of | | |
| nickel and 20% or more but not | | |
| more than 22% of chromium | | |
7223 00 190 0 | - - other | - | 5 |
| - containing by weight less than | | |
| 2.5% of nickel: | | |
7223 00 910 0 | - - containing by weight 13% or | - | 5 |
| more but not more than 25% of | | |
| chromium and 3.5% or more but | | |
| not more than 6% of aluminium | | |
7223 00 990 0 | - - other | - | 5 |
| IV. Other Alloy Steel; | | |
| Hollow Drill Bars and Rods, | | |
| of Alloy or Non-Alloy Steel | | |
7224 | Other alloy steel in ingots or | | |
| other primary forms; | | |
| semi-finished products of other | | |
| alloy steel: | | |
7224 10 000 0 | - ingots and other primary forms | - | 5 |
7224 90 | - other: | | |
| - - of rectangular (including | | |
| square) cross-section: | | |
| - - - hot-rolled or obtained by | | |
| continuous casting: | | |
| - - - - the width measuring less | | |
| than twice the thickness: | | |
7224 90 010 0 | - - - - - of high-speed steel | - | 5 |
7224 90 050 0 | - - - - - containing by weight | - | 5 |
| not more than 0.7% of carbon, | | |
| 0.5% or more but not more than | | |
| 1.2% of manganese and 0.6% or | | |
| more but not more than 2.3% of | | |
| silicon; containing by weight | | |
| 0.0008% or more of boron with any | | |
| other elements less than the | | |
| minimum content referred to in | | |
| Note 1f to this Chapter | | |
7224 90 080 0 | - - - - - other | - | 5 |
7224 90 150 0 | - - - - other | - | 5 |
7224 90 190 0 | - - - forged | - | 5 |
| - - other: | | |
| - - - hot-rolled or obtained by | | |
| continuous casting: | | |
7224 90 310 0 | - - - - containing by weight not | - | 5 |
| less than 0.9% but not more than | | |
| 1.15% of carbon, not less than | | |
| 0.5% but not more than 2% of | | |
| chromium, and, if present, not | | |
| more than 0.5% of molybdenum | | |
7224 90 390 0 | - - - - other | - | 5 |
| - - - forged: | | |
7224 90 910 0 | - - - - of circular or polygonal | - | 5 |
| cross-section | | |
7224 90 990 0 | - - - - other | - | 5 |
7225 | Flat-rolled products of other | | |
| alloy steel, of a width of 600 mm | | |
| or more: | | |
| - of silicon-electrical steel: | | |
7225 11 000 0 | - - grain-oriented | - | 5 |
7225 19 | - - other: | | |
7225 19 100 0 | - - - hot-rolled | - | 5 |
7225 19 900 0 | - - - cold-rolled | - | 5 |
7225 20 | - of high speed steel: | | |
7225 20 200 0 | - - not further worked than | - | 5 |
| rolled; not further worked than | | |
| surface-treated, including | | |
| cladding or simply cut into | | |
| shapes other than rectangular | | |
| (including square) | | |
7225 20 900 0 | - - other | - | 5 |
7225 30 000 0 | - other, not further worked than | - | 5 |
| hot-rolled, in coils | | |
7225 40 | - other, not further worked than | | |
| hot-rolled, not in coils: | | |
7225 40 200 0 | - - of a thickness exceeding 15 | - | 5 |
| mm | | |
7225 40 500 0 | - - of a thickness of 4.75 mm or | - | 5 |
| more but not exceeding 15 mm | | |
7225 40 800 0 | - - of a thickness of less than | - | 5 |
| 4.75 mm | | |
7225 50 000 0 | - other, not further worked than | - | 5 |
| cold-rolled (cold-reduced) | | |
| - other: | | |
7225 91 | - - electrolytically plated or | | |
| coated with zinc: | | |
7225 91 100 0 | - - - not further worked than | - | 5 |
| surface-treated, including | | |
| cladding or simply cut into | | |
| shapes other than rectangular | | |
| (including square) | | |
7225 91 900 0 | - - - other | - | 5 |
7225 92 | - - otherwise plated or coated | | |
| with zinc: | | |
7225 92 100 0 | - - - not further worked than | - | 5 |
| surface-treated, including | | |
| cladding or simply cut into | | |
| shapes other than rectangular | | |
| (including square) | | |
7225 92 900 0 | - - - other | - | 5 |
7225 99 | - - other: | | |
7225 99 100 0 | - - - not further worked than | - | 5 |
| surface-treated, including | | |
| cladding or simply cut into | | |
| shapes other than rectangular | | |
| (including square) | | |
7225 99 900 0 | - - - other | - | 5 |
7226 | Flat-rolled products of other | | |
| alloy steel, of a width of less | | |
| than 600 mm: | | |
| - of silicon-electrical steel: | | |
7226 11 | - - grain-oriented: | | |
7226 11 100 0 | - - - of a width exceeding 500 mm | - | 5 |
7226 11 900 0 | - - - of a width not exceeding | - | 5 |
| 500 mm | | |
7226 19 | - - other: | | |
7226 19 100 0 | - - - not further worked than | - | 5 |
| hot-rolled | | |
| - - - other: | | |
7226 19 300 0 | - - - - of a width exceeding 500 | - | 5 |
| mm | | |
7226 19 900 0 | - - - - of a width not exceeding | - | 5 |
| 500 mm | | |
7226 20 | - of high speed steel: | | |
7226 20 200 0 | - - not further worked than | - | 5 |
| hot-rolled; of a width not | | |
| exceeding 500 mm, hot-rolled, | | |
| not further worked than clad; of | | |
| a width exceeding 500 mm, not | | |
| further worked than cold-rolled | | |
| (cold-reduced) or not further | | |
| worked than surface-treated, | | |
| including cladding | | |
7226 20 800 0 | - - other | - | 5 |
| - other: | | |
7226 91 | - - not further worked than | | |
| hot-rolled: | | |
7226 91 100 0 | - - - of a thickness of 4.75 mm | - | 5 |
| or more | | |
7226 91 900 0 | - - - of a thickness of less than | - | 5 |
| 4.75 mm | | |
7226 92 | - - not further worked than | | |
| cold-rolled (cold-reduced): | | |
7226 92 100 0 | - - - of a width exceeding 500 mm | - | 5 |
7226 92 900 0 | - - - of a width not exceeding | - | 5 |
| 500 mm | | |
7226 93 | - - electrolytically plated or | | |
| coated with zinc: | | |
7226 93 200 0 | - - - of a width not exceeding | - | 5 |
| 500 mm hot-rolled, not further | | |
| worked than clad; of a width | | |
| exceeding 500 mm, not further | | |
| worked than surface-treated, | | |
| including cladding | | |
7226 93 800 0 | - - - other | - | 5 |
7226 94 | - - otherwise plated or coated | | |
| with zinc: | | |
7226 94 200 0 | - - - of a width not exceeding | - | 5 |
| 500 mm hot-rolled, not further | | |
| worked than clad; of a width | | |
| exceeding 500 mm, not further | | |
| worked than surface-treated, | | |
| including cladding | | |
7226 94 800 0 | - - - other | - | 5 |
7226 99 | - - other: | | |
7226 99 200 0 | - - - of a width not exceeding | - | 5 |
| 500 mm hot-rolled, not further | | |
| worked than clad; of a width | | |
| exceeding 500 mm, not further | | |
| worked than surface-treated, | | |
| including cladding | | |
7226 99 800 0 | - - - other | - | 5 |
7227 | Bars and rods, hot-rolled, in | | |
| irregularly wound coils, of other | | |
| alloy steel: | | |
7227 10 000 0 | - of high-speed steel | - | 5 |
7227 20 000 0 | - of silico-manganese steel | - | 5 |
7227 90 | - other: | | |
7227 90 100 0 | - - containing by weight 0.0008% | - | 5 |
| or more of boron with any other | | |
| element less than the minimum | | |
| content referred to in Note 1f to | | |
| this Chapter | | |
7227 90 500 0 | - - containing by weight 0.9% or | - | 5 |
| more but not more than 1.15% of | | |
| carbon, 0.5% or more but not | | |
| more than 2% of chromium, and, | | |
| if present, not more than 0.5% | | |
| of molybdenum | | |
7227 90 950 0 | - - other | - | 5 |
7228 | Other bars and rods of other | | |
| alloy steel; angles, shapes and | | |
| sections, of other alloy steel; | | |
| hollow drill bars and rods, of | | |
| alloy or non-alloy steel: | | |
7228 10 | - bars and rods, of high-speed | | |
| steel: | | |
7228 10 100 0 | - - not further worked than | - | 5 |
| hot-rolled, hot-drawn or | | |
| extruded | | |
| - - other: | | |
7228 10 300 0 | - - - hot-rolled, hot-drawn, or | - | 5 |
| extruded, not further worked than | | |
| clad | | |
7228 10 500 0 | - - - forged | - | 5 |
7228 10 900 0 | - - - other | - | 5 |
7228 20 | - bars and rods, of | | |
| silico-manganese steel: | | |
| - - not further worked than | | |
| hot-rolled, hot-drawn, or | | |
| extruded: | | |
7228 20 110 0 | - - - of rectangular (other than | - | 5 |
| square) cross-section, rolled on | | |
| four faces | | |
7228 20 190 0 | - - - other | - | 5 |
| - - other: | | |
7228 20 300 0 | - - - hot-rolled, hot-drawn or | - | 5 |
| extruded, not further worked | | |
| than clad | | |
7228 20 600 0 | - - - other | - | 5 |
7228 30 | - other bars and rods, not | | |
| further worked than hot-rolled, | | |
| hot-drawn or extruded: | | |
7228 30 200 0 | - - of tool steel | - | 5 |
| - - containing by weight 0.9% or | | |
| more but not more than 1.15% of | | |
| carbon, 0.5% or more but not | | |
| more than 2% of chromium, and, | | |
| if present, not more than 0.5% | | |
| of molybdenum: | | |
7228 30 410 0 | - - - of circular cross-section | - | 5 |
| of a dismeter of 80 mm or more | | |
7228 30 490 0 | - - - other | - | 5 |
| - - other: | | |
| - - - of circular cross-section | | |
| of a diameter of: | | |
7228 30 610 0 | - - - - 80 mm or more | - | 5 |
7228 30 690 0 | - - - - less than 80 mm | - | 5 |
7228 30 700 0 | - - - of rectangular (other than | - | 5 |
| square) cross-section, rolled on | | |
| four faces | | |
7228 30 890 0 | - - - other | - | 5 |
7228 40 | - other bars and rods, not | | |
| further worked than forged: | | |
7228 40 100 0 | - - of tool steel | - | 5 |
7228 40 900 0 | - - other | - | 5 |
7228 50 | - other bars and rods, not | | |
| further worked than cold-formed | | |
| or cold-finished: | | |
7228 50 200 0 | - - of tool steel | - | 5 |
7228 50 400 0 | - - containing by weight 0.9% or | - | 5 |
| more but not more than 1.15% of | | |
| carbon, 0.5% or more but not | | |
| more than 2% of chromium, and, | | |
| if present, not more than 0.5% | | |
| of molybdenum | | |
| - - other: | | |
| - - - of circular cross-section, | | |
| of a diameter of: | | |
7228 50 610 0 | - - - - 80 mm or more | - | 5 |
7228 50 690 0 | - - - - less than 80 mm | - | 5 |
7228 50 700 0 | - - - of rectangular (other than | - | 5 |
| square) cross-section, rolled on | | |
| four faces | | |
7228 50 890 0 | - - - other | - | 5 |
7228 60 | - other bars and rods: | | |
7228 60 100 0 | - - hot-rolled, hot-drawn or | - | 5 |
| extruded, not further worked than | | |
| clad | | |
| - - other: | | |
7228 60 810 0 | - - - of tool steel | - | 5 |
7228 60 890 0 | - - - other | - | 5 |
7228 70 | - angles, shapes and sections: | | |
7228 70 100 0 | - - not further worked than | - | 5 |
| hot-rolled, hot-drawn or | | |
| extruded | | |
| - - other: | | |
7228 70 310 0 | - - - hot-rolled, hot-drawn or | - | 5 |
| extruded, not further worked than | | |
| clad | | |
| - - - other: | | |
7228 70 910 0 | - - - - not further worked than | - | 5 |
| cold-formed or cold-finished | | |
7228 70 990 0 | - - - - other | - | 5 |
7228 80 | - hollow drill bars and rods: | | |
7228 80 100 0 | - - of alloy steel | - | 5 |
7228 80 900 0 | - - of non-alloy steel | - | 5 |
7229 | Wire of other alloy steel: | | |
7229 10 000 0 | - of high-speed steel | - | 5 |
7229 20 000 0 | - of silico-manganese steel | - | 5 |
7229 90 | - other: | | |
7229 90 500 0 | - - containing by weight 0.9% | - | 5 |
| more but not more than 1.15% of | | |
| carbon, 0.5% or more but not | | |
| more than 2% of chromium, and, | | |
| if present, not more than 0.5% | | |
| of molybdenum | | |
7229 90 900 0 | - - other | - | 5 |